Canon Group
Close Close
Menu Menu Close Close Search
EOS 5Ds front
EOS 5Ds Support
FAQs & troubleshooting

The camera cannot be connected with a computer / The computer does not recognize the camera (EOS 5DS / EOS 5DS R)

Content Id: 8202602400


If the camera cannot be connected to a computer, it may be due to one of the following reasons. Please confirm the following items in order.

1. The camera is not connected properly to the computer with the USB cable

To connect the camera to a computer, use the supplied USB cable. For details on how to connect the camera to a computer, please refer to Connecting the Camera to a Computer using a USB Cable (EOS 5DS / EOS 5DS R).

2. The camera is not recognized by EOS Utility (You can only click [Monitor Folder] on the main window of EOS Utility)

If the camera is not recognized by the supplied software, please try the possible solution methods listed below.

The supported software version may differ depending on the camera you use and the operating system installed on the computer.(Version 3.2 or later is supported.)
When using a camera or computer that differs from the model used initially, please download the supported version of EOS Utility. Versions of the EOS Utility Updater for a variety of cameras/operating systems can be downloaded from the Canon homepage.
EOS Utility does not operate correctly on a computer if its system requirements are not met. Use EOS Utility on a computer with compatible system requirements. For details on system requirements that are compatible with the application, please refer to the 'Related information' section at the bottom of the page.
EOS Utility and the camera may not communicate normally with a cable other than the EOS DIGITAL camera-dedicated Canon interface cable. Connect your camera and computer directly with the interface cable provided with your camera. Do not connect the camera via a hub; doing so may prevent EOS Utility and your camera from communicating normally.
If there is insufficient charge left in the camera battery, the camera cannot communicate with EOS Utility. In this case, replace the battery with a charged one, or use an AC adapter kit ACK-E6 (Separately available).Your computer does not supply power to the camera through the interface cable.

3. CameraWindow is being used

Your camera does not support CameraWindow. If you are using CameraWindow, please install and use the EOS Utility application supplied with the camera.

Caution

If your computer does not meet the System Requirements for EOS Utility, you can import images using a card slot on the computer or a commercially available card reader.

For the procedures for importing images using a card reader or a card slot on a computer, please see the 'Related Information' section at the end of the page.

4. The camera is not recognized by Windows OS

If the descriptions in items 1 and 2 above do not apply to your situation, the camera may not have been recognized by your computer's OS. For information on possible solutions, please see the 'Related information' section below.

"Was this helpful?"