Canon Group
Close Close
Menu Menu Close Close Search
MAXIFY MB5360 black front closed office professional printer
MAXIFY MB5360 Support
FAQs & troubleshooting

The printer cannot be detected (the message that the printer could not be detected on the network is displayed)

Content Id: 8202128000


During the wireless setup in the software installation, when the Check Printer Settings dialog box is displayed, try the solutions 1 to 4 one by one in order.

1. Before checking the wireless setting

1-1. First make sure all devices, namely, i) printer, ii) access point or iii) router is powered ON. Then, turn OFF every device and turn them ON again.

1-2. Place the printer and access point, or router, in the way there are no obstacles between them.

After doing step 1 and 2, click [ Redetect ] to continue the setup.

If the problem persists, check the following solution [ 2. Confirm whether the setting of the main unit is correct or not]:

2. Confirm whether the setting of the main unit is correct or not

Confirm that the wireless LAN connection is active.

step 1.

Flick the screen right or left, and tap [ Setup ].

step 2.

Tap [ Device settings ].

step 3.

Tap [ LAN settings ].

step 4.

Tap [ Confirm LAN settings ].

step 5.

Tap [ WLAN setting list ].

step 6.

When "WLAN setting list" is displayed, confirm that "Active" is displayed in "Connection".

If "Active" is not displayed in "Connection" ("Inactive" is displayed), the printer is not connected with the access point or the router. Please do the wireless setting again.

For the procedures, refer to [ Wireless LAN connection of your printer to an access point ].

3. Review the setting of the "Firewall" security software

3-1. The "Firewall" software interferes with the necessary network communication.

[How to confirm]

The operation of the "Firewall" security software may interfere with the communication for the wireless setup.

Register the following files to the "Firewall" security software as a file with access permit, or perform the setup with "Firewall" paused.

- For Windows

File name: Setup.exe

- For Macintosh

File name:

BJ Network Tool.app

canonijnetwork.bundle

CIJScannerRegister.app

CNNSelectorAgent.app

Canon IJ Network Scanner Selector EX.app

Caution

Regarding how to stop the operation of the "Firewall" security software, refer to the instruction manual for the security software, or contact its manufacturer.

Caution

Before disabling the "Firewall" operation of the security software, disconnect from the Internet.

If you still have the problem, try the next solution menu "4. Review the setting of the access point or the router."

4. Review the setting of the access point or the router

4-1. As the following setting interferes with the communication for the wireless setup, change the setting. After the setting is changed, perform the installation.

Caution

Regarding how to change the settings of the access point, and the cautions along with its change, refer to the instruction manual for the access point, or contact its manufacturer.

MAC address filtering function is enabled:

Change the setting of the access point so that the MAC address of the printer can be permitted.

The same SSID is used between the computer and the printer, and the privacy separator or the network disconnection function is enabled:

Disable the privacy separator or the network disconnection function.

The different SSID is used between the computer and the printer, and the privacy separator or the network disconnection function is enabled:

Use the same SSID for the computer as the one for the printer.

Caution

How to confirm the MAC address of the printer

step 1.

Flick the screen right or left, and tap [ Setup ].

step 2.

Tap [ Device settings ].

step 3.

Tap [ LAN settings ].

step 4.

Tap [ Confirm LAN settings ].

step 5.

Tap [ WLAN setting list ].

step 6.

In the [ WLAN setting list ] screen, flick up or down to check the [ MAC address ].

4-2. Confirm whether the firmware of the access point or the router has been updated to its latest version or not.

For how to update the firmware, refer to the instruction manual for the access point or the router, or you may contact each manufacturer for help.

"Was this helpful?"