Recording Movies at Specific Shutter Speeds, Aperture Values, and ISO Speeds (PowerShot G7X)

Content Id: 8202196700

Solution

Adjusting settings prior to recording
Changing Settings during Recording

Adjusting settings prior to recording

Set your preferred shutter speed, aperture value, and ISO speed.

The setting procedures are explained below.

1. Set the mode dial to ⋖Movie⋗ () and press the ⋖Power⋗ button to turn the camera on.

2. Press the ⋖FUNC./SET⋗ () button, press the ⋖⋗⋖⋗ buttons to choose [ Movie Mode] ()* in the menu, and then Press the ⋖⋗⋖⋗ buttons　or turn the ⋖⋗ dial　to choose [Manual] ()

* If the settings have not been changed, [ ] will be displayed as the default mode.

3. Configure the shutter speed, aperture value, or ISO speed, settings using the values displayed on the screen as a reference.

Turn the ⋖

⋗ dial to set the

shutter speed.

Turn the ⋖

]⋗ ring to set the

aperture value.

Press the ⋖

⋗ button, choose

ISO speed (

)* in the menu, and choose the desired option

* If the settings have not been changed, [ ] will be displayed as the default mode.

Shutter speed	1 / 30, 1 / 40, 1 / 50, 1 / 60, 1/80, 1/100, 1/125, 1/160, 1/200, 1 /250, 1 / 320, 1 /400, 1 /500, 1/640, 1/800, 1/1000, 1/1250, 1/1600, 1/2000
Aperture	F1.8, F2.0, F2.2, F2.5, F2.8, F3.2, F3.5, F4.0, F4.5, F5.0, F5.6, F6.3, F7.1, F8.0, F9.0, F10, F11
ISO speed	AUTO 100, 125, 160, 200 250, 320, 400, 500, 640, 800 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6400 8000, 10000, 12800

Caution

With [AUTO] ISO, the

exposure level mark moves when the shutter button is pressed halfway, showing the difference from the standard exposure level.

With ISO settings other than [ AUTO], an exposure level mark based on your specified shutter speed and aperture value is shown for comparison to the standard exposure level.