Solution
Getting startedStep 1: Installing CameraAccess plus
Step 2: Performing camcorder password and port configuration settings
Step 3: Connecting the camcorder to an access point
Step 4: Registering the camcorder’s ID in the iOS/Android device
Step 5: Controlling the camcorder with the iOS/Android device
Getting started
With this function of CameraAccess plus, you can leave the camcorder home and monitor the streamed image while you are away. You can even use your iOS/Android device to start recording on the camcorder.
When using an NFC-compatible Android device, you can connect the camcorder and the device with a simple operation.
The procedures for using Remote Control+Steaming are explained in the following five steps. Proceed in order from step 1.
Step 1: Installing CameraAccess plus
Step 2: Performing camcorder password and port configuration settings
Step 3: Connecting the camcorder to an access point
Step 4: Registering the camcorder’s ID in the iOS/Android device
Step 5: Controlling the camcorder with the iOS/Android device
Caution
The CameraAccess plus app, provided by PIXELA, is available for free from the App Store (for iOS devices) and Google Play™ (for Android smartphones).
In this example, setting procedures are shown in iOS 7 and Android 4.0.
The setting items and procedures may differ depending on the iOS/Android device you use and its operating system.
The CameraAccess plus application may not be supported by some iOS/Android devices depending on the model or installed operating system. For more information, please refer to System Requirements for Smartphone Applications (iVIS HF R62).
Caution
Using the Remote Monitoring Checker utility program (for Windows only), you can check whether your home network’s access point and Internet connection meet the requirements for using the Monitor while Out function*. For details about this program and links to the download page, visit PIXELA’s Web site.
http://pixela.jp/cermc
* To use the Monitor while Out Function, an access point compatible with UPnP (Universal Plug and Play) and an Internet connection that can acquire global IP addresses are required.
Step 1: Installing CameraAccess plus
1. iOS/Android device: Access the App Store (for iOS devices) or Google Play™ (for Android smartphones) via your device to download and install the CameraAccess app. If your device supports NFC, you can easily pair the camcorder and the device simply by touching the NFC touchpoints on both devices together.
Caution
NFC-compatible devices
: NFC touchpoint.
Touch the NFC touchpoint on the Android device* to the NFC touchpoint
on the camcorder.
* For illustration purposes only. For details about the device’s NFC function and the location/mark of the NFC touchpoint, refer to the instruction manual of the Android device used.
** Depending on the settings and specifications of the Android device used, no sound may be emitted.
Caution
When using NFC-compatible devices.
- When touching an NFC-compatible device to the camcorder, be careful not to forcibly hit the device against the camcorder. Using excessive force may damage the camcorder or NFC-compatible device.
- If the NFC-compatible device or the camcorder is covered by a protective case, the devices might not be able to connect wirelessly.
- If the camcorder unintentionally comes into contact with an NFC-compatible device (for example, inside a carrying bag), the camcorder may turn on on its own. You can set ⋗
⋗
⋗ [NFC] to [Off] to prevent this.
- When the video quality is 60P.
- When ⋗
⋗ [Dual recording] or [Relay recording] is activated.
Step 2: Performing camcorder password and port configuration settings
2. Camcorder: Turn on the camcorder and make sure it is set to a recording mode.
3. Camcorder: Touch the [ ] icon displayed on the screen.
4. Camcorder: Drag your finger left/right to bring the [Remote Control+Streaming] menu to the center, and then
touch the icon to open it.
5. Camcorder: Bring [ ] (Monitor while Out) to the center, and then touch [
].
6. Camcorder: Touch [ ].
7. Camcorder: Touch the password field.
8. Camcorder: Enter a unique 4 and 8 character password for the Monitor while Out function, and then touch [ ].
For more information on entering a password, please refer to the 'Using the virtual keyboard' below.
Caution
We recommend using an 8-character password using a mix of numbers and uppercase/lowercase letters.
Caution
Using the virtual keyboard
When you need to enter text for various settings, touch the text field and a virtual keyboard will appear on the screen. You must use the touch screen to operate the virtual keyboard. The illustrations below explain the various keys you can use.
:
(Press to exit after entering the information.)
: Text field
: Letter/number keys
:
/
(Switch between letters and numbers/special characters.)
: Space key
:
Backspace (Delete the character to the cursor’s left.)
:
/
/
Caps Lock. When the numerical keyboard is displayed, [#%?] switches between set 1 and set 2 of special characters.
:
(Change the position of the cursor.)
: Cancel
9. Camcorder: Touch the port number entry field.
10. Camcorder: Enter the port number, and touch [ ].
Caution
By default, the port number is set to 80 but you can change it if necessary.
11. Camcorder: Touch [ ].
Step 3: Connecting the camcorder to an access point
12. If necessary, set up a connection to an access point.
Caution
If you have previously configured and saved a connection to an access point, the camcorder will connect automatically to the last access point used.
Touch [ ] twice, and then proceed to step 15.
13. Camcorder: Touch the desired connection method.
You can select from the following four connection methods.
For more information on your access point, please refer to its Instruction Manual.
WPS: Button* | Simply press and hold the WPS button on your wireless router and then touch the camcorder’s screen. This is the easiest connection method if you are using a WPS-compatible router. |
WPS: PIN Code* | Access the access point’s configuration screen using your Web browser. The camcorder will give you a PIN code, which you will enter into the browser. You will need a WPS-compatible router and a computer or other device connected to it. |
Search for Access Points | Following the camcorder’s onscreen instructions, you select the desired access point from a list and then enter your password. |
Manual Setup | You manually enter the access point’s name, password and other network settings. This method is recommended only for advanced users of Wi-Fi networks. |
* WPS, which stands for Wi-Fi Protected Setup, is a standard that makes connecting to a wireless router easier.
If your access point is WPS-compatible , connecting the camcorder to it can be very easy. If you cannot successfully connect the camcorder using WPS, try using the [Search for Access Points] method.
[WPS: Button] method: Please proceed to step 14-a-1.
[WPS: PIN Code] method: Please proceed to step 14-b-1.
Search for Access Points: Please proceed to step 14-c-1.
Manual Setup: Please proceed to step 14-d-1.
Caution
The camcorder can connect to a Wi-Fi network using a wireless router (access point) and even remember the settings for the 4 most recently used access points.
Caution
General requirements for Wi-Fi connections.
14-a-1. [WPS: Button] method
Press and hold the WPS button on the wireless router.
14-a-2. Camcorder: Within 2 minutes, touch [OK] on the camcorder’s screen.
The camcorder will connect to the access point.
You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress.
When the Wi-Fi Protected Setup is finished, [Configuration completed] will appear on the screen.
14-b-1. [WPS: PIN Code] method
From a computer or similar device connected to the access point, use the Web browser to open the router’s WPS settings screen. After the 8-digit PIN code appears on the camcorder’s screen, enter it into your router’s WPS settings screen.
14-b-2. Camcorder: Within 2 minutes, touch [OK] on the camcorder’s screen.
The camcorder will connect to the access point.
You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress.
When the Wi-Fi Protected Setup is finished, [Configuration completed] will appear on the screen.
14-c-1. Search for Access Points
After you touch [Search for Access Points], the camcorder will take a few seconds to detect access points available in the vicinity and will display the first one.
14-c-2. Confirm the access point’s setting information.
Make a note in advance of the network name (SSID) and password (encryption key) of the access point you want to use.
14-c-3. Camcorder: Select the desired access point.
The network name (SSID) of the desired access point appears.
Touch [
] or [
] to select the desired access point from the list.
Touch [ OK ].
14-c-4. Camcorder: Enter the access point’s password (encryption key).
If the access point selected in step 2-c-3 did not have a [ ] icon, this step is not necessary.
To enter the [Encryption Key] field, touch [Not configured] , and then enter the access point’s password (encryption key).
Touch [OK].
14-c-5. Camcorder: Touch [ OK ].
The screen will change once the setting is complete.
14-d-1. Manual Setup
Perform this procedure to manually configure the wireless connection settings. This may be necessary, for example, if your access point’s network name (SSID) cannot be detected due to the stealth function being enabled. Manual setup is for advanced users of Wi-Fi networks.
14-d-2. Camcorder: Enter the SSID.
Touch the [SSID] field.
Enter the SSID, touch [OK], and then touch [Next].
14-d-3. Camcorder: Touch the [Authentication/Encryption Method] field.
Touch [OPEN NONE].
14-d-4. Camcorder: Touch the desired method.
If you selected [OPEN WEP], the WEP index is 1.
14-d-5. Camcorder: Enter the encryption key.
If you selected [OPEN NONE] in step 14-d-4., this step is not necessary.
Touch the [Encryption Key] field, and then enter the encryption key (password).
Touch [Next].
14-d-6. Camcorder: Select how to obtain the IP address.
Touch [Automatic] or [Manual].
If you selected [Automatic], please proceed to 14-d-12.
14-d-7. Camcorder: To enter the [IP Address] field, touch [0.0.0.0].
Touch the first field.
14-d-8. Camcorder: Touch [ ] or [
] to change the value. Change the rest of the fields in the same way and touch [OK].
14-d-9. Enter the [Subnet Mask] field in the same way and touch [Next].
14-d-10. Enter the [Default Gateway] field in the same way and touch [Next].
14-d-11. Enter the [Primary DNS Server] and [Secondary DNS Server] fields in the same way and touch [Next].
14-d-12. Camcorder: Save the configuration.
Touch [ OK ].
The screen will change once the setting is complete.
Step 4: Registering the camcorder’s ID in the iOS/Android device
15. iOS/Android device: Register the camcorder’s ID and password.
If the iOS/Android device is connected to the same Wi-Fi network as the camcorder, CameraAccess plus will recognize the camcorder's ID and register it automatically.
The iOS/Android device setting procedures for both automatic (15-a), and manual (15-b) registration are explained below.
Caution
As long as you do not reset the camcorder's settings, you only need to register the camcorder's ID the first time you connect the device.
Caution
Pairing an NFC-compatible device
: NFC touchpoint
1. Touch the NFC touchpoint on the Android device* to the NFC touchpoint
on the camcorder.
* For illustration purposes only. For details about the device’s NFC function and the location/mark of the NFC touchpoint, refer to the instruction manual of the Android device used.
** Depending on the settings and specifications of the Android device used, no sound may be emitted.
2. Android device: When the camcorder’s ID is correctly registered, a message will prompt you to turn off Wi-Fi on the device. Select [Turn off Wi-Fi] or [Do not turn off Wi-Fi] (to keep using Wi-Fi on the device) and then touch Set.
15-a-1. Connect the iOS/Android device to the access point you registered in step 14.
15-a-2. Start the CameraAccess plus app.
15-a-3. Start the CameraAccess plus app and touch [Setting] and then [Start].
15-a-4. The camcorder’s ID will be registered.
15-a-5. Touch [End].
15-a-6. End the wireless connection to the access point.
15-b-1. Start the CameraAccess plus app.
15-b-2. Touch [Start].
15-b-3. Follow the onscreen instructions to register the ID displayed on the camcorder’s screen.
Step 5: Controlling the camcorder with the iOS/Android device
16. iOS/Android device: Start CameraAccess plus while in a secondary location.
Caution
Confirm that the camcorder is on, set to Monitor while Out, and connected to a Wi-Fi access point.
17. iOS/Android device: connect to the Wi-Fi network and touch [Start] under [Monitor while Out].
18. iOS/Android device: Enter the password for the [Monitor while Out] function that you set in the camcorder in step 7, and then touch Connect.
19. iOS/Android device: Use the app’s onscreen controls to operate the camcorder while viewing the live image on the device.
20. Camcorder: To end the Monitor while Out mode, touch [End] to end the wireless connection and then turn off the camcorder.
Caution
http://pixela.jp/cermc
- When the video quality is 50P.
- When ⋗
⋗ [Dual recording] or [Relay recording] is activated.
About the optional CT-V1 Camera Pan Table
- If you mount the camcorder on the optional CT-V1 Camera Pan Table, you can use the CameraAccess plus app on your iOS/ Android device as a remote control to move the camcorder sideways (panning) in addition to starting/stopping recording.
- Notice that there are two possible directions for mounting a camcorder on the CT-V1. This camcorder should be mounted so that the lens is aligned with the mark on the underside of the CT-V1’s camcorder base plate. For details, refer to the instruction manual of the CT-V1.