Solution
When turning the camera’s power on or off, the Self Cleaning Sensor Unit is activated to automatically shake off the dust on the front of the sensor (CMOS).
Normally, you need not pay attention to this operation. However, you can run the sensor cleaning at any time by following the procedures below.
Caution
The position and shape of the operation buttons may differ depending on the model you use.
1. Set the power to [ON].
2. Press the [MENU] button to display the menu screen.
3. Press the [ ], [
] keys to select [
].
4. Press the [ ], [
] keys to select [Sensor cleaning], then press [
].
5. Press the [ ], [
] keys to select [Clean now], then press [
].
6. Press the [ ] key to select [OK], then press [
].
7. The screen will indicate that the sensor is being cleaned.
Although there will be a shutter sound, a picture is not taken.
Caution
Caution
*If the abovementioned items (Digital Photo Professional software/Instruction Manuals) were not included with you camera, please download them from the Canon homepage.