Solution
IntroductionStep 1 : Intalling Image Transfer Utility 2
Step 2 : Connecting the Camera to the Computer
Step 3 : Setting Up Auto Image Transfer
Step 4 : Sending Images to the Computer
On-Screen Keyboard
Introduction
How to send images from the camera to a computer using Image Transfer Utility 2.
Caution
Step 1 : Intalling Image Transfer Utility 2
1. Download the software [ Image Transfer Utility 2 ] from the Canon homepage on to your computer, and proceed to installation.
2. Once the installation is complete, the settings window for [ Image Transfer Utility 2 ] will be displayed, click [ Next ] .
3. [ Preparation ] will be displayed, read the details carefully and click [ Next ] .
4. [ Pairing Setup ] will be displayed. Keep the screen as it is displayed, and move on to the next step.
Step 2 : Connecting the Camera to the Computer
1. Press the
button.
2. Use the zoom lever to choose the
tab.
3. Press the
/
buttons to choose [ Wi-Fi settings ], then press the
button.
4. Press the
/
buttons to choose [ Auto send images to computer ], then press the
button.
Caution
If [ Wi-Fi ] settings has [ Disable ] selected, change settings to [ Enable ] .
5. Press the
/
buttons to choose [ Auto send ], then press the
button.
6. Press the
/
buttons to choose [ Enable ], then press the
button.
7. Press the
/
buttons to choose [ OK ], then press the
button.
8. Right-click the Start button on the bottom left of the screen (
), and then select [Network Connections].
9. When this screen is displayed, double-click [Wi-Fi].
10. Press the
/
buttons to select the SSID that matches with the one shown in [SSID:], and then press the
button. (See the SSID example below).
11. Click [Wireless Properties].
12. Click the [Security] tab.
13. Tick the [Show characters] checkbox.
14. On the [ Password ] screen, press the
button.
15. Enter the password displayed in the [Network security key]. (See the password example below).
16. After the password has been entered, press the
/
buttons to choose [ OK ] , press the
button.
17. Click [Cancel].
18. Click [Close].
19. Close [Network Connections].
20. Press the
/
buttons to choose Key index, press the
button. (This screen may or may not be displayed)
21. Press the
/
buttons to choose [ Auto setting ] , press the
button.
22. The computer name will appear. Confirm that the name displayed on the [ Pairing Setup ] screen is the same, press the
button.
23. If the camera Nickname is displayed under [ Procedure for this screen ] , select camera and click on [ Pairing ].
24. Once pairing is complete, the [ Setup Complete ] window will appear, click [ OK ] .
25. The [ Waiting ] window will appear for Image Transfer Utility 2. To continue transfering images from the camera, stay on this screen and wait.
Caution
To save images in a different folder, click on the computer icon to open [ Set Destination Folder ] window.
Step 3 : Setting Up Auto Image Transfer
1. Choose
menu ⋗ [Wireless communication settings] ⋗ [Wi-Fi settings] ⋗ [Auto send images to computer].
2. Choose [ Image sending options ] .
3. In [Image sending options], specify the transfer conditions.
4. Turn the camera off.
Step 4 : Sending Images to the Computer
1. Confirm that the Image Transfer Utility 2 window shows [ Waiting ] .
2. The images will automatically transfer to the computer once the camera has been turned on within range of the access point.
3. To confirm the transferred images, click [ Open Destination Folder ] .
Caution
Caution
On-Screen Keyboard
Use the on-screen keyboard to enter information. Note that the length and type of information you can enter varies depending on the function you are using.
•Entering characters Touch the characters to enter them. | |
•Moving the cursor Choose [ You can also move the cursor by turning the | |
•Switching input modes Choose [ Choose [ | |
•Deleting characters Choose [ | |
•Confirming input After pressing the |