Solution
Part I. Preparing for Live View ShootingPart II. Selecting the AF Mode
Part II-1 Using AF (Live Mode) to Focus
Part II-2. Using AF (Face detection Live Mode) to Focus
Part II-3. Using AF (Quick Mode) to Focus
Part III. Focusing Manually
Part IV. Shooting
General Note for Live View Shooting
With your camera, you can shoot photos while viewing the image on the camera's LCD monitor. This is called "Live View shooting."
This page describes how to change the focus mode for Live View shooting. For details on how to perform easy Live View shooting in default settings, please refer to the related information.
Please note that some shooting procedures differ between still photos and movies. To shoot still photos, please refer to the instructions for still photos, and to shoot movies, please refer to the instructions for movies.
Part I. Preparing for Live View Shooting
1. Turn the camera's power switch to ⋖ON⋗.
2. Turn the Mode Dial to set the shooting mode.
To use AF to focus, please proceed to Part II. To focus manually, please proceed to Part III.
Part II, and III describe common procedures for still photos and movies.
Part II. Selecting the AF Mode
3. Set the lens focus mode switch to ⋖AF⋗.
4. Make sure that the camera is ready to take shots, and then press the ⋖MENU⋗ button.
5. Press the ⋖Cross Keys⋗ to select tabs on the MENU screen.
6. Select the [AF mode], and then press the ⋖SET⋗ button.
7. Select the AF mode, and then press the ⋖SET⋗ button.
Caution
While the image is displayed on the LCD monitor, pressing the ⋖ ⋗ button will enable you to set the AF mode etc. on the Quick Control Screen.
For more information, please refer to the instruction manuals that came with your camera.
8. Select the image-recording quality for still images or the movie-recording size for movies.
For more information about the image quality of still images and the recording size of movies, please refer to the instruction manuals that came with your camera.
9. To shoot still photos, press the ⋖ ⋗ (Live View shooting/Movie shooting) button, or to shoot movies, press the ⋖MENU⋗ button, and then close the menu window. An image will appear on the LCD monitor.
Please proceed to Part II 1 to 3 depending on the AF mode setting.
Part II-1 Using AF (Live Mode) to Focus
When [Live mode] ( ) is set:
The image sensor is used to focus. Although AF is possible with the Live View image displayed, the AF operation will take longer than with Quick mode. Also, achieving focus may be more difficult than with Quick mode.
[Live mode] is set by default.
10. Move the AF point.
11. Aim the AF point over the subject and press the shutter button halfway.
Please proceed to Part IV.
Part II-2. Using AF (Face detection Live Mode) to Focus
When [ (Face Detection) Live mode] is set:
With the same AF method as the Live mode, human faces are detected and focused. Have the target person face the camera.
10. When you press the ⋖ ⋗ button, the Quick Control screen will appear. The settable functions will be highlighted in blue.
With the ⋖ ⋗ (Cross Keys), select [
] (
(Face detection) Live Mode) as shown in the image below.
Note that the Quick Control menu display will disappear a few seconds after an item has been selected.
11. Focus the target face.
12. Press the shutter button halfway and the camera will focus the face covered by the [ ] frame.
Caution
Notes when shooting in [ (Face detection) Live Mode]
Please proceed to Part IV.
Part II-3. Using AF (Quick Mode) to Focus
When [Quick mode]( ) is set:
The dedicated AF sensor is used to focus in the same way as with viewfinder shooting. Although you can focus the desired area quickly, the Live View image will be interrupted momentarily during the AF operation.
10. The small boxes on the screen are the AF points, and the larger box is the magnifying frame.
11. When you press the ⋖ ⋗ button, the Quick Control screen will appear. The settable functions will be highlighted in blue.
Press the ⋖ ⋗(Cross Keys) to select [
] (Quick mode).
12. Select the AF point. Press the ⋖ ⋗ (Cross Keys) to make the AF point selectable. Turn the ⋖Main Dial⋗ to select the AF point.
13. Aim the AF point over the subject and press the shutter button halfway.(Keep the shutter pressed.)
14. The Live View image will turn off, the reflex mirror will go back down, and AF will be executed.
Please proceed to Part IV.
Part III. Focusing Manually
You can magnify the image and focus precisely manually.
3. Once you have proceeded up to Step 2 of Part I, set the lens focus mode switch to ⋖MF⋗.
4. To shoot still photos, make sure that the camera is ready to take shots, and then press the ⋖ ⋗(Live View shooting) button. To shoot movies, set the Mode Dial to ⋖
⋗.
5. The Live View image will appear on the LCD monitor.
Turn the lens focusing ring to focus roughly.
6. Press the ⋖Cross Keys⋗ to move the magnifying frame to the position where you want to focus.
To return the AF point to the center, press the ⋖SET⋗ button. (If C.Fn-8 has been set, press ⋖ ⋗ + ⋖SET⋗.)
7. Press the ⋖ ⋗ (Magnifying) button to magnify the area within the frame.
Each time you press the ⋖ ⋗ button, the display format will change as follows:
Normal view -⋗ Approx. 5x -⋗ Approx. 10x -⋗ Normal view
8. While looking at the Live View image on the LCD monitor, turn the focusing ring to focus manually.
9. After achieving focus, press the ⋖ ⋗ (Magnifying) button to check the image composition in normal view.
Part IV. Shooting
After focus is achieved by following the instructions in Part II-III, start shooting.
To shoot still photos, press the shutter button completely.
To shoot movies, press ⋖ ⋗.
General Note for Live View Shooting
Please be aware of the following notes for Live View shooting.
Caution
Notes About the Live View Image
White [ ] and Red [
] Internal Temperature Warning Icons
Live Mode and (Face Detection) Live Mode Notes
Caution
When shooting with the camera connected to a TV
If you shoot in Live View with the camera connected to a TV, you can use the TV screen as the LCD monitor. This is convenient when you want to enlarge what you want to shoot to check the details. When connecting the camera to the TV with an HDMI cable, please be aware of the following points.
For more information on how to connect a camera to a TV, please refer to the instruction manuals that came with your camera.