EOS 6D Mark II Support

FAQs & troubleshooting

Reverting the Camera to the Default Settings (EOS 6D Mark II)

Content Id: 8203577300

The camera’s shooting function settings and menu settings can be reverted to their defaults.

1. Set the camera's power switch to ⋖ON⋗.

2. Press the ⋖MENU⋗ button to display the menu screen.

3. Press the ⋖ ⋗ button, then select the [ ] tab.

4. Under the [ ] tab, select [Clear all camera settings], then press ⋖ ⋗.

5. Select [OK].

The camera settings will be reset to the default settings shown below.

Shooting Function Settings
AF operation	One-Shot AF	Interval timer	Disable
AF area selection mode	Automatic selection AF	Bulb timer	Disable
Lens electronic MF	Disable after One-Shot AF	Anti-flicker shooting	Disable
Metering mode	(Evaluative metering)	Mirror lockup	Disable
ISO speed settings		Viewfinder display
ISO speed	Auto	Electronic level	Hide
ISO speed range	Minimum: 100 Maximum: 40000	Grid display	Hide
Auto range	Minimum: 100 Maximum: 12800	Show/hide in viewfinder	Only flicker detection selected
Minimum shutter speed for auto	Auto	Custom Functions	Unchanged
Drive mode	(Single shooting)	External Speedlite control
Exposure compensation/AEB	Canceled	Flash firing	Enable
Flash exposure compensation	Canceled	E-TTL II flash metering	Evaluative flash metering
Multiple exposure	Disable	Flash sync. speed in Av mode	Auto
HDR mode	Disable HDR

Image Recording Settings
Image quality		Custom White Balance	Canceled
Aspect ratio	3:2	White balance shift	Canceled
Picture Style	Auto	WB-BKT	Canceled
Auto Lighting Optimizer	Standard	Color space	sRGB
Lens aberration correction		Long Exposure Noise Reduction	Disable
Peripheral illumination correction	Enable	High ISO speed noise reduction	Standard
Chromatic aberration correction	Enable	Highlight tone priority	Disable
Distortion correction	Disable	File numbering	Continuous
Diffraction correction	Enable	Dust Delete Data	Erased
White balance	(Ambience priority)

Camera Settings
Image review time	2 sec.	Language	Unchanged
Release shutter without card	Enable	GPS	Disable
Image jump w/	(10 images)	Video system	Unchanged
Highlight alert	Disable	Shooting mode guide	Enable
AF point display	Disable	Feature guide	Enable
Playback grid	Off	Help text size	Small
Histogram display	Brightness	Touch control	Standard
Magnification (Approx.)	2x (magnify from center)	Beep	Enable
Control over HDMI	Disable	Auto cleaning	Enable
Vertical image auto rotation	On	button display options	Select both
Wireless communication settings		button LV display options	Unchanged
Wi-Fi	Disable	Multi function lock	(Quick Control Dial)
Bluetooth function	Disable	Custom shooting mode	Unchanged
Auto power off	1 min.	Copyright information	Unchanged
LCD brightness		Configure: MY MENU	Unchanged
LCD off/on btn	Remains on	Menu display	Normal display
Date/Time/Zone	Unchanged

Movie Shooting Settings
Movie recording size	NTSC: PAL:	Movie Servo AF	Enable
Sound recording	Auto	AF method	+Tracking
Wind filter	Auto	Movie Servo AF track sensitivity	0
Attenuator	Disable	Movie Servo AF Speed
ISO speed settings		When active	Always on
ISO speed	Auto	AF speed	0 (Standard)
ISO speed range	Minimum: 100 Maximum: 25600	Metering timer	8 sec.
ISO Auto	Maximum 25600	Grid display	Hide
ISO Auto	Maximum 12800	button function	/-
		Video snapshot	Disable
		Time-lapse movie	Disable
		Movie digital IS	Disable
		Remote control shooting	Disable

"Was this helpful?"

Yes.It solved my issue

It covered my problem, but the solution didn't work for me

The information on the page is hard to understand

It has nothing to do with my issue

Submit