Solution
1. Try connecting the camera to a different USB terminal.2. Change the USB cable connecting the camera to the computer.
3. Try using the Device Manager
When the camera is connected to a Windows 10 operated computer, and the computer does not recognize the camera, follow the instructions in order.
Caution
Importing problems may occur if there are too many images (more than 1,000) on the memory card.
In this case, use a memory card reader to import the images.
1. Try connecting the camera to a different USB terminal.
If there are multiple USB terminals on your computer, connecting the cable to a different USB terminal may allow the camera to be recognized by the computer.
2. Change the USB cable connecting the camera to the computer.
The computer should recognize the camera once the USB cable is changed and reconnected to the computer. Use a cable that has a Micro-B plug for the camera. A genuine Canon accessory is also available (Interface Cable IFC-600PCU).
3. Try using the Device Manager
If you reconnect the camera and the computer with a USB cable and try to detect the camera again after deleting the camera information using the Device Manager, the camera will sometimes be detected correctly.
Caution
1. Click [File Explorer] in the taskbar in the lower-left part of the screen.
2. Select and right-click [This PC] () on the displayed screen, and click [Properties] (
).
3. Click [Device Manager] in the upper-left corner of the screen.
4. Double-click [ Portal Devices ] on the [ Device Manager ] screen.
5. Select the device name of your camera (), click [
] (
) and delete the information from the device.
Caution
6. Click [OK].
7. Click [ ] (Scan for hardware changes).
Caution
8. If the camera is recognized, the following screen will be displayed.
Caution