Solution
Getting StartedStep 1 : Intalling Image Transfer Utility 2
Step 2 : Connecting the Camera to the Computer
Step 3 : Setting Up Auto Image Transfer
Step 4 : Sending Images to the Computer
Using the On-Screen Keyboard
Getting Started
How to send images from the camera to a computer using Image Transfer Utility 2.
Caution
Step 1 : Intalling Image Transfer Utility 2
1. Download the software [ Image Transfer Utility 2 ] from the Canon homepage on to your computer, and proceed to installation.
2. Once the installation is complete, the settings window for [ Image Transfer Utility 2 ] will be displayed, click [ Next ] .
3. [ Preparation ] will be displayed, read the details carefully and click [ Next ] .
4. [ Pairing Setup ] will be displayed. Keep the screen as it is displayed, and move on to the next step.
Step 2 : Connecting the Camera to the Computer
1. Press the
button.
2. When the [ Nickname ] screen appears, press the
button.
3. Confirm the Nickname (Name of the camera). After confirmation, press the
button.
Caution
4. Press the
/
buttons to choose [ OK ] , press the
button.
5. Press the
button.
Return to the function settings menu.
6. Press the
/
buttons to choose [
] , press the
button.
7. Press the
/
buttons to choose [
1 ] .
8. Press the
/
buttons to choose [ Wireless communication settings ] , press the
button.
9. Press the
/
buttons to choose [ Wi-Fi settings ] , press the
button.
10. Press the
/
buttons to choose [ Auto send images to computer ] , press the
button.
Caution
If [ Wi-Fi ] settings has [ Disable ] selected, change settings to [ Enable ] .
11. Press the
/
buttons to choose [ Auto send ] , press the
button.
12. Press the
/
buttons to choose [ Enable ] , press the
button.
13. Press the
/
buttons to choose [ OK ] , press the
button.
14. Right-click the Start button (
) on the bottom left of the screen, and then select [Network Connections].
15. Right-click [Wi-Fi] and select [Status].
16. Select the SSID that matches with the one shown in [SSID:], and then press the
button. (See the SSID example below).
17. Click [Wireless Properties].
18. Click the [Security] tab.
19. Tick the [Show characters] checkbox.
20. On the [ Password ] screen, press the
button.
21. Enter the password displayed in the [Network security key]. (See the password example below).
22. After the password has been entered, press the
/
buttons to choose [ OK ] , press the
button.
23. Click [Cancel].
24. Click [Close].
25. Close [Network Connections].
26. Press the
/
buttons to choose Key index, press the
button. (This screen may or may not be displayed)
27. Press the
/
buttons to choose [ Auto setting ] , press the
button.
28. The computer name will appear. Confirm that the name displayed on the [ Pairing Setup ] screen is the same, press the
button.
29. If the camera Nickname is displayed under [ Procedure for this screen ] , select camera and click on [ Pairing ].
30. Once pairing is complete, the [ Setup Complete ] window will appear, click [ OK ] .
31. The [ Waiting ] window will appear for Image Transfer Utility 2. To continue transfering images from the camera, stay on this screen and wait.
Caution
To save images in a different folder, click on the computer icon to open [ Set Destination Folder ] window.
Step 3 : Setting Up Auto Image Transfer
1. Choose [
] menu ⋗ [Wireless communication settings] ⋗ [Wi-Fi settings] ⋗ [Auto send images to computer].
2. Choose [ Image sending options ] .
3. In [Image sending options], specify the transfer conditions.
4. Make sure the camera is off.
Step 4 : Sending Images to the Computer
1. Confirm that the Image Transfer Utility 2 window shows [ Waiting ] .
2. The images will automatically transfer to the computer once the camera has been turned on within range of the access point.
3. To confirm the transferred images, click [ Open Destination Folder ] .
Caution
Caution
Using the On-Screen Keyboard
Use the on-screen keyboard to enter information. Note that the length and type of information you can enter varies depending on the function you
are using.
• Entering characters Press the | |
•Moving the cursor Choose [ | |
•Switching input modes Choose [ Choose [ | |
•Deleting characters Choose [ | |
•Confirming input After pressing the |
Caution