Drivers & downloads

Firmware CR-N700 Ver. 1.4.0

Content Id: 0400974502

Description

Detail

Firmware Version 1.4.0 incorporates the following fixes and enhancements:

1. Adds Lite version of the automatic tracking application. Lite version application has basic features of the automatic tracking application.
2. Adds [Canon 709/ BT.709] to the Gamma/ Color Space in Custom Picture Settings.
3. Adds [G Gain] in White Balance in Custom Picture Settings.
4. Adds [CMT709] to LUT and View Assist in Monitoring Settings.
5. Enables the ability to adjust Custom Picture [Black: Master Pedestal], [Black: Master Black Red], [Black: Master Black Blue], and [Black: Master Black Green] more widely.
6. Enables the ability to set Clear Scan Settings in more detail.
7. Adds function for setting a limit on the range of operation of the pan /tilt.
8. Enables the ability to set zoom and focus speeds in more detail.
9. Enables the ability to make [Speed Level] of Preset Setting a finer adjustment at lower speeds.
10. Adds function for selecting SDI output timecode superposition on or off.
11. Displays the Camera Name set by the user at the top of the Settings Page.
12. Increases target bit rate limit when using encryption with SRT protocol.
13. Fixes minor issues.

Update the firmware from the camera's Settings Page.
For details, refer to the camera's Settings Guide.

- crn700-v140.bin

The firmware contains software modules developed by third parties. For details, see "ReadMe-E.txt" in the downloaded file and "ThirdPartySoftware-E.pdf" (third-party software) in the lower part of each folder in the "LICENSE" folder. The license terms for each module are contained in the same folder.

Update History

Ver. 1.3.0
1. Adds support for registering the still thumbnail when a preset memory is registered.
2. Adds support for registering the still thumbnail of the trace start position.
3. Adds function for freeze image during preset moving.
4. Adds Adaptive Bitrate (ABR) function for video delivery over SRT protocol.
5. Adds support for setting up to four output destinations for the free-d protocol.
6. Adds the option "other than network settings and management information" as restore items for the backup/ restore function.
7. Adds Backup/ Restore function for Add-On Applications System settings.
8. Fixed a bug that caused Genlock to not sync when camera startup.
9. Fixes an issue that caused audio noise during RTMP distribution to the video streaming service.
10. Fixes minor issues.

Ver. 1.2.0
1. Adds support for licenses activation tool.
　　*When the application is ready for release, we will inform you on our website.
2. Add-on applications and licenses are no longer deleted when you switch back to factory settings with the unit RESET switch.

Ver. 1.1.0
1. Adoption of "Add-On Applications System" that extends camera functions by installing paid applications.

System requirements

Windows 10 64bit, Windows 11
macOS 14, macOS 13

Setup Instructions

1. Download the file to any folder.
2. Extract files from a compressed file (ZIP file).
3. For further instructions, refer to Readme in the decompressed folder.

Caution

Do not turn off the power to the camera while performing the firmware update.
Turning off the camera at this stage may result in disabling its ability to boot correctly.

File information

File Name : crn700-v140.zip
File Type : FA
File Size : 85989931KB

Download