Solution
When shooting with AEB, three consecutive images are captured at different exposure levels (standard exposure, underexposure, and then overexposure) each time you shoot. You can adjust the amount of underexposure and overexposure (relative to standard exposure) from –2 to +2 stops in 1/3-stop increments.
Caution
The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] (
).
AEB shooting is only available in [
] mode.
Continuous shooting is not available in this mode.
To set [
], it is necessary to set the [Shooting Mode] to one of the following modes:
- [Aperture Priority AE] ( ), [Shutter Speed Priority AE] (
), [Program AE] (
).
1. Turn the camera on.
2. Press the ⋖⋗ button, choose [
] in the menu, and then choose [
].
3. Configure the setting.
Press the ⋖
⋗ button, and then adjust the setting by pressing the ⋖
⋗⋖
⋗ buttons or turning the ⋖
⋗ dial.
4. Press the shutter button all the way down to shoot. Three consecutive images are captured each time you shoot.
Caution
If exposure compensation is already in use, the value specified for that function is treated as the standard exposure level for this function.
You can also access the setting screen of step 3 by pressing the ⋖MENU ⋗ button when the exposure compensation screen is displayed.
Three shots are taken, regardless of any quantity specified in [
].
In [Blink Detection] mode, this function is only available for the final shot.