Drivers & downloads

Firmware CR-X300 Ver. 1.3.0

Content Id: 0400974302

Description

Detail

Firmware Version 1.3.0 incorporates the following fixes and enhancements:

1. Enables the ability to adjust Custom Picture [Black: Master Pedestal], [Black: Master Black Red], and [Black: Master Black Blue] more widely.
2. Revises the display of Clear Scan Settings.
3. Adds function for turning [S/N Priority] ON or OFF when [Noise Reduction] is set to [Auto]. When ON, noise reduction is prioritized.
4. Adds function for setting a limit on the range of operation of the pan/ tilt.
5. Enables the ability to set zoom and focus speeds in more detail.
6. Enables the ability to make [Speed Level] of Preset Setting a finer adjustment at lower speeds.
7. Displays the Camera Name set by the user at the top of the Settings Page.
8. Increases target bit rate limit when using encryption with SRT protocol.
9. Fixes minor issues.

Update the firmware from the camera's Settings Page.
For details, refer to the camera's Settings Guide.

- crx300-v130.bin

The firmware contains software modules developed by third parties. For details, see "ReadMe-E.txt" in the downloaded file and "ThirdPartySoftware-E.pdf" (third-party software) in the lower part of each folder in the "LICENSE" folder. The license terms for each module are contained in the same folder.

Update History

Ver. 1.2.0
1. Adds support for registering the still thumbnail when a preset memory is registered.
2. Adds support for registering the still thumbnail of the trace start position.
3. Adds function for freeze image during preset moving.
4. Adds Adaptive Bitrate (ABR) function for video delivery over SRT protocol.
5. Adds support for setting up to four output destinations for the free-d protocol.
6. Adds the option "other than network settings and management information" as restore items for the backup/ restore function.
7. Adds Backup/ Restore function for Add-On Applications System settings.
8. Adds Support for shutter and white balance settings in the NU protocol.
9. Fixes an issue that caused audio noise during RTMP distribution to the video streaming service.
10. Fixes minor issues.

Ver. 1.1.0
1. Adds support [Add-On Applications System] that extends camera functions by installing paid applications.
　　*When the application is ready for release, we will inform you on our website.
2. Adds support for NDI 5.
　　*NDI: An open standard for connecting video equipment over a network.
3. Adds record button for camera settings
4. Adds support for SRT protocol.*
　　*SRT Protocol: A widely used video transmission protocol for video streaming and live broadcast, developed and open sourced by Haivision and supported by the SRT Alliance.
5. Adds the ability to allow passwordless login for the image quality page.
6. Adds speed setting when registering presets.
7. Adds support for simplified Chinese UI.
8. Improves PTZ usability in settings pages. (Adds drag move feature)
9. Video output from SDI/ HDMI is possible by default when no LAN cable is inserted.
10. Adds angle for shutter mode (adjusting with open angle).
11. Adds function for fine-tuning the WB color correction value (CC).
12. Adds support for free-d protocol.*
　　*free-d protocol: A widely used protocol for camera tracking communication, mainly in virtual studio systems.
13. Adds support for licenses activation tool.
　　*When the application is ready for release, we will inform you on our website.

Ver. 1.0.1
1. Fixes an issue which may cause the pan/ tilt/ zoom not to move to the correct position during prolonged use of power supply.
2. Fixes an issue which phase adjustment function of Genlock not possible.

System requirements

Windows 10 64bit, Windows 11
macOS 14, macOS 13

Setup Instructions

1. Download the file to any folder.
2. Extract files from a compressed file (ZIP file).
3. For further instructions, refer to Readme in the decompressed folder.

Caution

Do not turn off the power to the camera while performing the firmware update.
Turning off the camera at this stage may result in disabling its ability to boot correctly.

File information

File Name : crx300-v130.zip
File Type : FA
File Size : 77831464KB

Download